一、在進行包裝時，我們通常會選用井字架包裝，包裝要符合貯運的需求；井字架是由木材制做而成，上下都是用兩根木方構成，關于下木方的高度，要滿意叉車的作業需求，上木方要上面制做成與卷徑相對應的圓弧形狀，上下木方分別用螺桿進行固定，螺桿的長度要低于上木方的圓弧面避免扎傷鋁圓片。
1、 When packaging, we usually choose well frame packaging, which should meet the needs of storage and transportation; The well frame is made of wood, and the upper and lower parts are composed of two wooden squares. As for the height of the lower wooden square, it should meet the operation requirements of the forklift. The upper wooden square should be made into an arc shape corresponding to the winding diameter. The upper and lower wooden squares are fixed with screws respectively. The length of the screws should be lower than the arc surface of the upper wooden square to avoid damaging the aluminum disc.
第二、鋁箔卷外面需要纏上一層健壯的中性或弱酸性的資料（一般選用高發布），然后放人裝箱單，搭接處運用膠帶粘牢。在端面上墊上軟襯墊.以保護鋁箱卷的端面避免劃傷。
Second, the outside of the aluminum foil roll needs to be wrapped with a layer of robust neutral or weak acid data (generally high release), and then put it into the packing list, and the lap joint shall be glued with adhesive tape. Put a soft pad on the end face To protect the end face of aluminum box coil from scratch.
第三、加入干燥劑。運用整張塑料布包裹住全部的料卷，搭接處外層的塑料布口向下要用膠帶粘牢，將塑料布兩頭剩余塞入管芯。用尺度合適的防雨硬紙板分別沿圓周方向包裹全部鋁圓片和關閉兩頭面，端面和圓周相接處以及全部的縫隙都要用膠帶粘牢。
Third, add desiccant. Wrap all material rolls with a whole piece of plastic cloth. The opening of the plastic cloth on the outer layer of the lap joint shall be glued down with adhesive tape, and the remaining two ends of the plastic cloth shall be inserted into the pipe core. Wrap all aluminum discs and close both ends along the circumference with waterproof cardboard with appropriate scale. The joint between the end face and the circumference and all gaps shall be glued with adhesive tape.

第四、將包好的鋁箔卷放到井字架上而且沿著圓周方向再運用鋼帶固定，鋼帶要捆綁扎結實。在包裝好的鋁箔卷端面上分別貼上一張箱牌。除箱子和井字架的承重、包裝本錢外，還應寫上運送辦法及用戶的運送裝卸方法及注意事項。到井字架上并且沿著圓周方向再使用鋼帶固定，鋼帶要捆綁扎結實。在包裝好的鋁箔卷端面上分別貼上一張箱牌。除箱子和井字架的承重、包裝本錢外，還應寫上運送方法及用戶的運送裝卸方式及注意事項。
Fourth, put the wrapped aluminum foil roll on the well frame and fix it with steel belt along the circumferential direction. The steel belt should be bound and tied firmly. A box plate shall be pasted on the end face of the packaged aluminum foil roll. In addition to the load-bearing and packaging cost of the box and well frame, the transportation method, the transportation, loading and unloading method and precautions of the user shall also be written. To the well frame and fix it with steel belt along the circumferential direction. The steel belt shall be bound firmly. A box plate shall be pasted on the end face of the packaged aluminum foil roll. In addition to the load-bearing and packaging cost of the box and well frame, the transportation method, the transportation, loading and unloading method and precautions of the user shall also be written.
圓片在我們的生活中也是無處不在，比如我們生活中的各種家電外殼，還有圓片在我們的日子中也是無處不在，比方我們?nèi)兆又械母鞣N家電外殼，還有各種各樣的電子產品以及汽車產品等。鋁帶重量和強度不高，純鋁的強度雖不高，但經過冷加工可使其進步一倍，而且經過增加合金元素再經過熱處理進一步強化，其強度可與合金鋼媲美。
Wafers are also ubiquitous in our life, such as all kinds of home appliance shells in our life, and wafers are also ubiquitous in our days, such as all kinds of home appliance shells in our days, as well as all kinds of electronic products and automotive products. The weight and strength of aluminum strip are not high. Although the strength of pure aluminum is not high, it can be doubled after cold processing. Moreover, after adding alloy elements and further strengthening after heat treatment, its strength can be comparable to that of alloy steel.
鋁易加工，鋁可以用任何一種鑄造辦法鑄造。鋁塑性好，可以軋成薄板和箔，拉成管材和細絲，可以用各種機床進行加工。鋁圓片通常選用井字架的方法包裝，井字架大多數選用的是木材，上下都是用兩根木方構成，關于下木方的高度，可以滿意叉車的作業需求。
Aluminum is easy to process and can be cast by any casting method. Aluminum has good plasticity. It can be rolled into thin plates and foils, pulled into pipes and filaments, and processed with various machine tools. Aluminum wafers are usually packed with the method of well frame. Most of the well frame is made of wood, and the upper and lower parts are composed of two wooden squares. The height of the lower wooden square can meet the operation requirements of forklift.
鋁板生產廠家專注為客戶提供滿意的服務，更多的精彩內容請點擊進入我們的網站http://www.guangshe.com.cn，我們會有更多精彩內容等您查看.
Aluminum plate manufacturers focus on providing customers with satisfactory services. For more wonderful contents, please click to enter our website http://www.guangshe.com.cn , we will have more wonderful content for you to check